steel bar stirrup bending machine

My company produces steel bending hoop in the continuous innovation, superb technology, innovative products, first-class quality of service, by the majority of new and old customers trust. The following for everyone to introduce the attention of steel bending hoop machine:

(1).check the mechanical properties are good, workbench and bending hoof machine su***ce level; and ready for a variety of mandrel tool block.

(2)according to the diameter of steel processing and bending hoop machine installed mandrel, forming shaft, retaining iron shaft or variable shelves, mandrel diameter should be 2.5 times the diameter of steel. The company is located in:

(3) check the mandrel, stop, turntable should be no damage and cracks, protective cover secure reliable operation by the air machine to confirm the normal operation.

(4)homework, the steel should be bent in the turret inserted a fixed gap, the other end close to the fuselage fixed and pressed by hand, check the fuselage fixed, indeed security in blocking the side of the bar before the start.

(5)the operation is strictly prohibited to replace the mandrel and change the angle and speed and other operations, but also refuel or cleared.

(6) bending steel, non-mechanical processing exceeds the provisions of the steel diameter, root number and mechanical speed.

(7)bending high hardness or low alloy steel, should be required to change the standard nameplate limit the maximum diameter, and exchange the corresponding mandrel.

(8)no bending radius of the operating radius and the fuselage without a fixed side of the station. Bend a good semi-finished products should be stacked neatly, the hook may not be up.

(9) turntable commutation, must be stopped after the steady.

(10)finished, clean up the scene, maintenance machinery, power lock box.